Share to
Modified epoxy anchoring adhesive TD400
Still deciding? Get samples first, Contact US !
View similar products
Tag list
- Product Description
-
Product description:
·Anchorage adhesive is composed of peroxide, quartz powder, modified resin, with special reinforcing adhesive gun and mixer to use.
It has passed the non-toxic test and horizontal combustion test of the testing centre of the Institute of Construction and Research, and has passed the certification of the National Quality Centre for Construction Engineering.Application:
·Curtain wall keel fixing
·Glass railing fixing
·Fixing of large decorative elements
·Fixing of large-sized overhanging canopiesSubstrate:
·Non-cracked concrete (compression zone)/cracked concrete (tension zone)
·Reinforced concrete and plain concrete of strength classes C20/25 to C50/60Caveat:
·After the mixer is installed, the first 10cm of adhesive can not be used (the adhesive is not mixed well), it is necessary to use with a special reinforcing gunAdvantages:
·Excellent bonding properties even at high temperatures
·No expansion stress, can be installed in a smaller edge, spacing conditions
·Safe, environmentally friendly and non-toxic, passed the non-toxic test of the Institute of Construction and Research
·Low colloid shrinkage, can be used for large diameter reinforcementOperation process
Product specifications and technical parameters
Product Model
TD-400
Capacity
420ml
Accessory 1-Mixer
Mixer*1
Accessory 2-Dedicated Reinforcement Gun
1:1 Special Reinforcement Gun*1
Chemical reaction times
Substrate temperature
Initial setting time
Hardening time
-10~-5℃
180min
8D
-5~0℃
120min
7D
0~10℃
60min
6D
10~25℃
40min
4D
25~40℃
20min
2D
>40℃
10min
1D
Rubber Usage Chart
Anchor type
Hole Diameter(mm)
Drilling depth(mm)
Number of holes per bolt
TFZ-T M12*105/25
14
110
28
TFZ-T M16*120/35
18
125
15
TFZ-T M20*165/65
25
170
6
TFZ-T M24*205/65
28
210
4
TFZ-T M30*265/70
35
280
2
Technical parameters
Testing items
Testing basis
Technical Specification(Class I adhesive)
Test Result
单项评定
Grade A
Cleavage tensile strength, MPa
GB 50728-2011 Appendix
≥8.5
18.23
satisfy
Flexural strength
GB/T 2567-2021
GB 50728-2011
Article 4.2
≥50,and shall not be damaged by cracking
82.9,and shall not be damaged in a crumbly manner
satisfy
Compressive strength
≥60
101.6
satisfy
Steel-to-steel tensile shear strength, standard value
GB/T 7124-2008
≥10
15.2
satisfy
Bond strength between ribbed steel and concrete under end pull-out condition
C30 φ25 L=150mm
GB 50728-2011Appendix K
≥11
14.0
satisfy
C60 φ25 L=125mm
≥17
20.2
satisfy
Steel-to-steel impact peeling length, mm
GB 50728-2011Appendix F
≤25
0(uncracked)
satisfy
Heat distortion temperature, °C
B method using bending stress of 0.45 MPa
GB/T 1634.2-2019
≥65
67.4
satisfy
Non-volatile matter content, %
GB 50728-2011Appendix H
≥99
99.6
satisfy
Modified epoxy anchoring adhesive TD400
Still deciding? Get samples first, Contact US !
Products Category
Tag list
Modified epoxy anchoring adhesive TD400
Inquire Now
Note: Please leave your email address, our professionals will contact you as soon as possible!
INQUIRY
