Injection Reinforcement Adhesive TDUN390S

·Q345 hot-rolled channel steel ·Hot dip galvanized steel, HDG>50 μ M

Email:

sales06@tedunzg.com

WhatsApp:

+86 15544780895

Inquire Now

Still deciding? Get samples first, Contact US !

View similar products

Anchor bolt

Tag list

Self-cutting anchor bolt

Product Description

Product Description:
·Epoxy injectable reinforcing adhesive is a two-component high-strength modified epoxy resin mortar.
·Mixed modified epoxy resin mortar, with a special reinforcing adhesive gun and mixer to use.
*It is suitable for cracked/non-cracked concrete, natural stone,Solid brick/masonry and other substrates, structural solid fact or equipment installation.
*It can be applied under special conditions such as dampness, no open water, overhead work, etc.
*Epoxy resin reinforcing adhesive passed GB50367A grade adhesive certification, more stable and durable performance in harsh environments. During the injection process,the resin mortar is mixed in the static mixer without separate mixing process.

Caveat:
Mixer installed after the head of the glue about 10cm can not be used (at this time the gel is not mixed evenly) need to support the use of special reinforcement gun is not a one-time use of reinforcement adhesive can be replaced in the mixing head of the second time after use

★Product specifications and technical parameters

Product Model	TDUN390S
Capacity	390ml
Accessory 1-Mixer	Mixer*1
Accessory 2-Dedicated Reinforcement Gun	3:1 Special Reinforcement Gun *1

★ Chemical reaction schedule

Substrate temperature	Initial setting time	Curing time
-10℃~-5℃	180min	8D
-5℃~-0°	120min	7D
0℃~-10℃	60min	6D
10℃~-25℃	40min	4D
25℃~-40℃	20min	2D
>40℃	10min	1D

★ Rubber Usage Chart

Anchor bolt type	Hole Diameter(mm)	Buried depth(mm)	Number of holes available for each rubber
M12×160	14	110	28
M16×190	18	125	15
M20×260	25	170	6
M24×300	28	210	4
M30×380	35	280	2

Note:The table data is for reference only, the specific dosage is decided according to the working conditions.