Share to
Special inverted cone anchor TDZ-T
Still deciding? Get samples first, Contact US !
View similar products
Tag list
- Product Description
-
Product description:
·Inverted taper anchor consisting of bolt, flat pad and nut. Installation with injectable epoxy adhesive.Application:
·Curtain wall embedded parts fixing
·Curtain wall keel fixing
·Glass railing fixing
·Fixing of large decorative components
·Fixing of large overhanging canopiesMaterial:
·Grade 4.8 steel, Grade 5.8 steel, Grade 8.8 steel,Stainless steel 304(A2-70)/316(A4-80)
·Surface treatment (except for stainless steel):
Electro-galvanised (zinc layer thickness >5um), Used inNormal environment
Hot-dip galvanised (zinc layer thickness >50um), for corrosive environmentsSubstrate:
·Non-cracked concrete/cracked concrete
·Natural stoneAdvantages:
·Stable and excellent anchorage performance under high loads and vibration loads
·Low expansion stresses for small margins and spacingsOperation process
1、Use straight hole drill bit to drill the corresponding diameter and depth of the hole
2、Use the dust blower to blow dust into the hole for more than 2 times.
3、Use the brush to clean the dust on the wall of the hole for more than 2 times.
4、Use the dust blower to blow dust into the hole until there is no dust overflow in the hole.
5、Inject the reinforcement adhesive and screw in the anchor bolt.
Product specifications and technical parameters
Product type
Drilling diameter do(mm)
Drilling depth h₁ (mm)
Effective anchorage depth ho(mm)
Maximum anchorage thickness tfix(mm)
Screw length L(mm)
Screw specification
Minimum substrate thickness h(mm)
TDZ-T M8*75/15
10
80
75
15
110
M8
140
TDZ-T M10*85/20
12
90
85
20
130
M10
160
TDZ-T M12*105/25
14
110
105
25
160
M12
210
TDZ-T M16*120/35
18
125
120
35
190
M16
210
TDZ-T M20*165/65
25
170
165
65
260
M20
340
TDZ-T M24*205/65
28
210
205
65
300
M24
370
TDZ-T M30*265/70
35
270
265
70
380
M30
540
Table of basic design parameters
Product Model
M8
M10
M12
M16
M20
M24
M30
C30 non-cracked concrete Upper tensile design value reference value
Level 5.8
10.3
13.8
19.8
30.9
52.4
87.5
133.6
Level 8.8
12.4
16.8
22.9
34.5
58.8
87.5
133.6
A2-70
11.8
15.3
20.8
32.3
55.8
87.5
133.6
A2-80
12.4
16.8
22.9
34.5
58.8
87.5
133.6
C30 non-cracked concrete Upper shear design reference value
Level 5.8
7.3
11.5
15.5
29.5
47.5
68.5
125.3
Level 8.8
9.0
14.1
20.5
37.3
59.2
86.0
139.6
A2-70
8.3
13.1
19.0
32.3
55.4
82.0
129.5
A2-80
9.0
14.1
20.5
37.3
59.2
86.0
139.6
Tensile design reference value on C30 cracked concrete
Level 5.8
8.5
13.8
20.5
24.0
48.2
52.5
--
Level 8.8
A2-70
A2-80
Reference values for shear design values on C30 cracked concrete
Level 5.8
7.3
11.5
15.5
29.8
47.5
68.5
125.3
Level 8.8
9.0
14.1
20.5
37.3
59.2
86.0
139.6
A2-70
8.3
13.1
19.0
29.5
55.2
82.0
129.5
A2-80
9.0
14.1
20.5
37.3
59.2
86.0
139.6
Special inverted cone anchor TDZ-T
Still deciding? Get samples first, Contact US !
Products Category
Tag list
Special inverted cone anchor TDZ-T
Inquire Now
Note: Please leave your email address, our professionals will contact you as soon as possible!
INQUIRY
