Share to
Special inverted cone anchors
Still deciding? Get samples first, Contact US !
View similar products
Tag list
- Product Description
-
Product Description:
Composed of metal parts (screws, flat washers, nuts) and chemical tubes available in 5.8 grade steel, 8.8 grade steel, 304(A2-70)/316(A4-80) stainless steel and other materials.
Metal (except stainless steel) part of the surface treatment are:
1、Electro-galvanised (zinc layer thickness >5um), used in ordinary environment;
2、Hot dip galvanised (zinc layer thickness >50 um), used in corrosive environments;
Used in cracked/non-cracked concrete, natural stone and other substrates, small spacing, small margins of the structural components of the fixed or equipment installation.
*Anchor bolts have stable and excellent anchorage performance under high loads and vibration loads, epoxy resin reinforcing adhesive is more stable and long lasting in harsh environments.Product Applications:
·Fence ·Silo Installation ·Cantilever Brackets/Bull Legs ·Curtain Walls ·Masts ·Escalators ·Stairs ·Skirting board protection ·Cable bridges ·Steel consoles ·Steel structures ·Machinery and equipment ·Wood construction Operation process:
1.use straight hole drill bit to drill the corresponding diameter and depth of the hole
2.Pake more than 2 times using a dust blower to blow dust into the holes
3. Use the brush to clean the hole wall dust more than 2 times
4. Then use the dust blower to blow dust into the hole until no dust overflows from the hole
5. Special inverted conical anchors are screwed in after injection of the reinforcement adhesive
★Product specifications and technical parameter
Product Specification Drill diameter d0(mm) Drilling depth h1(mm) Maximum anchor thickness tfix(mm) Minimum substrate thickness h(mm) Overall screw length L(mm) M8*110 10 80 15 140 110 M10*130 12 90 20 160 130 M12*160 14 110 25 210 160 M16*190 18 125 35 210 190 M20*260 25 170 65 340 260 M24*300 28 210 65 370 300 M30*380 35 270 70 540 380 ★Basic design and parameter table
Product Model M8 M10 M12 M16 M20 M24 M30 Reference values for tensile design on C30 non-cracked concrete Level 5.8 10.3 13.8 19.8 30.9 52.4 87.5 133.6 Level 8.8 12.4 16.8 22.9 34.5 58.8 87.5 133.6 A2-70 11.8 15.3 20.8 32.3 55.8 87.5 133.6 A4-80 12.4 16.8 22.9 34.5 58.8 87.5 133.6 Reference values for shear design values on c3o non-cracked concrete ten Level 5.8 7.3 11.5 15.5 29.5 47.5 68.5 125.3 Level 8.8 9.0 14.1 20.5 37.3 59.2 86.0 139.6 A2-70 8.3 13.1 19.0 32.3 55.4 82.0 129.5 A4-80 9.0 14.1 20.5 37.3 59.2 86.0 139.6 Reference values for tensile design values on C30 cracked concrete Level 5.8 8.5 13.8 20.5 24.0 48.2 52.5 -- Level 8.8 A2-70 A4-80 Reference values for shear design on C30 cracked concrete Level 5.8 7.3 11.5 15.5 29.8 47.5 68.5 125.3 Level 8.8 9.0 14.1 20.5 37.3 59.2 86.0 139.6 A2-70 8.3 13.1 19.0 32.3 55.2 82.0 129.5 A4-80 9.0 14.1 20.5 37.3 59.2 86.0 139.6
Special inverted cone anchors
Still deciding? Get samples first, Contact US !
Products Category
Tag list
Special inverted cone anchors
Inquire Now
Note: Please leave your email address, our professionals will contact you as soon as possible!
INQUIRY
